
If you are an engineer or buyer looking for a CNC manufacturing partner in North Orange County, two shops a few miles apart may come up. CRD Manufacturing, which operates as CRD MFG, Inc., is a Placentia tube fabricator founded in 2011 that cuts, bends, machines, and welds tube under one roof for a wide mix of industries. Moseys Production Machinists, Inc. is an Anaheim production machine shop founded in 1975 by Fred and Nedra Mosey that turns and mills parts around the clock and adds finishing, assembly, and inventory programs.
The core tradeoff is a multi-process tube fabricator that publishes its bending capacities against a certified production machine shop built for repeat orders. CRD MFG combines laser tube cutting, CNC tube bending up to 6 inches in diameter, CNC machining, robotic welding and product development support, and it inspects bent tube with a Faro Arm and VTube software. Moseys holds ISO 9001 and AS9100 Rev D certification and ITAR registration, runs automated production in a 32,000-square-foot plant, and manages coating, assembly, kitting, and Kanban inventory for its customers.
For parts built from tube or that need cutting, bending, machining, and welding from one Orange County shop, we lean toward CRD MFG. Domestic sourcing remains an important consideration for manufacturers. In an April 2026 announcement, the Reshoring Initiative stated that annual reshoring job announcements had increased from 11,000 in 2010 to approximately 244,000 in 2025. The linked document is a survey announcement, not the 2025 annual report.
Quick Verdict
Best for CRD MFG: Manufacturers and product developers in food-grade, petrochemical, automotive, medical, aerospace, and architectural work who need tube cut, bent, machined, and welded in one Orange County shop with published capacities.
Best for Moseys Production Machinists: Aerospace, defense, medical and industrial buyers who need machined parts in steady production volumes from an AS9100 and ITAR-registered shop, with finishing, assembly and inventory managed for them.
Decision rule: If your part involves tube bending or welding as well as machining, choose CRD MFG.
|
CRD MFG |
Moseys Production Machinists |
|
|---|---|---|
|
Location |
615 Fee Ana Street, Placentia, CA |
1550 Lakeview Loop, Anaheim, CA |
|
Founded |
2011, by Tim Carroll |
1975, by Fred and Nedra Mosey |
|
Facility |
22,500 square feet |
32,000 square feet; 33 employees |
|
Core focus |
Tube fabrication plus CNC machining |
Production CNC milling and turning |
|
Cutting and bending |
Laser tube cutting; CNC tube bending, 1/4 to 6 inch OD |
Not listed |
|
Welding |
Robotic welding |
Not listed |
|
Machining |
CNC lathes and mills, prototypes to production |
24/7 automated production; parts from 0.050 to 24 inches |
|
Secondary services |
Product development, reverse engineering, material storage |
Coating, plating, anodizing, assembly, kitting, Kanban and VMI |
|
Inspection |
Faro Arm with VTube software |
CMM inspection |
|
Certifications |
BBB A+; no quality certification published |
ISO 9001, AS9100 Rev D, ITAR registered, per its site |
CRD MFG, Inc. is a precision tube fabrication company founded in 2011 by owner Tim Carroll and based in a 22,500-square-foot facility in Placentia, in Orange County. It offers laser tube cutting, CNC tube bending, CNC machining, and robotic welding, plus product development, reverse engineering, material sourcing, and storage. Its bending cell includes three BLM Elect benders and an Eaton Leonard VB600 refurbished in 2025 for tubes up to 6 inches in diameter, and it inspects parts with a Faro Arm and VTube software. It serves aerospace, food-grade, petrochemical, automotive, medical, and architectural customers, from single custom pieces to production runs. Its main differentiator is keeping four metal processes in one building, with a direct project manager for each customer.
Moseys Production Machinists, Inc. is a veteran-owned, third-generation family machine shop at 1550 Lakeview Loop in Anaheim, founded in 1975 by Fred and Nedra Mosey and led today by president John Zmuda. Its 33 employees run automated CNC milling and turning around the clock in a 32,000-square-foot plant, machining parts from 0.050 to 24 inches in aluminum, steel, stainless, cast iron, titanium, Inconel, and plastics. It holds ISO 9001 and AS9100 Rev D certification and ITAR registration, inspects with CMMs, and manages coating, plating, assembly, kitting, and Kanban inventory. It serves aerospace, defense, medical, hydraulics, semiconductor, and industrial customers. Its main differentiator is certified, high-volume production machining.
This is the clearest difference between the two shops.
CRD MFG publishes its tube capacities. Laser tube cutting adds holes, slots and complex geometries to tube, pipe, angle, box and channel. Its benders cover 1/4 inch to 6 inch outer diameter with wall thickness from 0.035 to 0.188 inch and centerline radii from 0.75 inch to 15 inches. It welds assemblies robotically and checks bent parts with a Faro Arm and VTube software, which compares each tube to its 3D model.
Moseys Production Machinists does not list cutting, bending, or welding. It machines parts from bar, plate, and castings, and a buyer whose product needs bent tube or welded frames would need a second supplier.
Why it matters: a frame, handrail, or fluid line with several bends needs a bender, tooling for each diameter, and a way to measure bent geometry. The Fabricators & Manufacturers Association publishes training and resources on tube and pipe fabrication methods for buyers and shops.
If you want tube cut, bent, machined, and welded under one roof, CRD MFG fits. If your part is fully machined from solid stock or a casting, Moseys fits.
Moseys Production Machinists builds its business around machining at volume. Moseys runs automated CNC production around the clock and offers scheduled deliveries and vendor-managed inventory. Its current Anaheim machining page reports 99.1 percent on-time delivery and 99.4 percent of orders meeting or exceeding quality requirements. Other company pages publish different historical figures, so these metrics should be attributed to the specific page rather than presented as company-wide audited results. It also handles finishing through approved outside processors, mechanical assembly, labeling, kitting, and vendor-managed inventory.
CRD MFG offers CNC machining on lathes and mills in metals and plastics, from rapid prototypes to production runs, with several finish options. It uses machining alongside its tube work, so a bent and cut tube can have fittings or machined ends added in the same building. Its machining page does not list machine models or tolerances.
Why it matters: a part ordered in the thousands every quarter rewards a shop tuned for repeat production and inventory programs. The NIST Manufacturing Extension Partnership supports small and midsize manufacturers and can help buyers evaluate regional suppliers.
If you need machined parts on a steady production schedule with managed inventory, Moseys fits. If machining is one step in a developing product, CRD MFG fits.
Moseys Production Machinists lists ISO 9001 and AS9100 Rev D certification, ITAR registration, and CMM-based quality control, and says it works through NADCAP-accredited suppliers for managed secondary processing. Its site carries testimonials from aerospace and medical device customers.
CRD MFG positions itself as a development partner. It offers product development and reverse engineering, sources and stores material, and assigns each customer a direct project manager. It has an A+ BBB rating and does not publish a quality system certification such as ISO 9001 or AS9100.
Why it matters: aerospace and defense primes usually require AS9100 registration, and parts with export-controlled data require ITAR registration with the State Department. The Directorate of Defense Trade Controls explains ITAR registration for manufacturers.
If your drawings call for AS9100 or ITAR, Moseys fits. If you want design and sourcing help on a product that is still changing, CRD MFG fits.
Neither company publishes prices. Both quote by project, since cost depends on material, size, machining time, bend or cut count, tolerances, welding, finishing, and quantity.
CRD MFG takes project details through a quote form and says timelines depend on complexity.
Moseys Production Machinists takes requests through a quote form and by phone, and its scheduled-delivery and Kanban programs can spread the cost of a large order across quarterly or monthly shipments.
To compare fairly, send both shops the same drawing or 3D model, material specification, finish, annual quantity, and required certifications, and ask what is included, such as first article inspection, material certifications, finishing, and packaging.
All figures are as of October 2026.
CRD MFG has an A+ rating on its BBB profile, with no customer reviews shown, and its ThomasNet profile lists 10 to 49 employees. We found no public complaints.
Moseys Production Machinists shows testimonials on its website attributed to people at Beckman, Eaton, Senior Aerospace, and Spectra Sensor, who praise on-time delivery, responsiveness, and consistent quality. Moseys Production Machinists holds a 4.8 out of 5 rating from 33 reviews on Birdeye, including 32 Google reviews and one Facebook review. Its official website also features customer testimonials highlighting delivery, responsiveness, and consistent quality.
CRD MFG has limited public customer feedback, while Moseys Production Machinists has a 4.8-star rating across 33 reviews on Birdeye. Buyers should still request industry-specific references and sample inspection reports from both companies.
Choose CRD MFG if:
Choose Moseys Production Machinists if:
Moseys Production Machinists holds 4.8 out of 5 stars from 33 reviews on Birdeye, including two ratings below three stars. CRD MFG has an A+ BBB business rating but no published BBB customer reviews. Buyers should examine recent feedback and request references for comparable manufacturing projects.
CRD MFG is at 615 Fee Ana Street in Placentia, and Moseys Production Machinists is at 1550 Lakeview Loop in Anaheim. Both are in North Orange County, a short drive apart, which makes site visits and first article reviews easy for local buyers.
CRD MFG bends tube from 1/4 inch to 6 inch outer diameter, with wall thickness from 0.035 to 0.188 inch depending on diameter. Its centerline bend radius ranges from 0.75 inch to 15 inches, and its Eaton Leonard VB600 handles the 6-inch work.
Moseys Production Machinists says it holds AS9100 Rev D and ISO 9001 certification and is ITAR registered. It works with NADCAP-accredited suppliers for special processes such as finishing. Ask for current certificates and the registrar's name before placing aerospace or defense orders.
Kanban is a pull system that replenishes parts as they are used rather than in large, irregular batches. A machine shop running a Kanban program holds finished parts and ships them on a signal or schedule, which lowers the buyer's inventory. Moseys offers Kanban and vendor-managed inventory.
Yes. CRD MFG offers product development, reverse engineering, material sourcing and storage, and gives each customer a direct project manager. It handles everything from a single custom piece to production runs, which suits products whose design is still changing before release.
Match the shop to your part. Check its machines and processes, the materials and tolerances it handles, any cutting, bending, welding, or finishing it offers, and the certifications your drawings require. Then ask for references and a sample inspection report from a similar job.
