Hand Crafted Metalworks vs. Angels Ornamental Iron: Ornamental Ironwork and Metal Fabrication Options in Anaheim, CA

by Kim Greene / November 19, 2026 / 
Hand Crafted Metalworks vs. Angels Ornamental Iron

Rust is the quiet cost of any iron gate, fence, or railing. Corrosion costs an estimated $2.5 trillion a year worldwide, about 3.4% of global GDP, and applying corrosion control best practices could save 15% to 35% of that cost, according to the NACE International IMPACT study. For Anaheim homeowners, that means the way a fabricator welds, primes, and finishes steel matters as much as the design. Two Orange County shops that build ornamental and custom metalwork for Anaheim homes are Hand Crafted Metalworks and Angels Ornamental Iron.

Hand Crafted Metalworks is a Santa Ana fabrication shop that cites more than 30 years of experience and pairs its custom builders with an in-house engineering department. It makes modern and traditional pieces in steel, aluminum, stainless steel, and glass, from gates, doors, and balconies to fireplaces, furniture, and hospitality fixtures. Angels Ornamental Iron is an Anaheim wrought iron company led by owner John Kang that hand-forges cold-rolled steel into fences, gates, doors, railings and security pieces, holds a C-23 license issued in 1999 and offers a one-year workmanship warranty.

For Anaheim homeowners who want custom metalwork that goes beyond classic wrought iron, including mixed materials and engineered pieces, we lean toward Hand Crafted Metalworks.

Quick Verdict

Best for Hand Crafted Metalworks: Anaheim homeowners and designers who want contemporary or mixed-material work, such as glass-and-steel balconies, aluminum pivot doors, stainless outdoor kitchen pieces, or custom furniture, engineered and built in one shop.

Best for Angels Ornamental Iron: Anaheim and Anaheim Hills homeowners who want classic Spanish, Tuscan, or French wrought iron, automated driveway gates, security doors or window guards, and repairs, from an owner-led local shop with a written one-year warranty.

Decision rule: If your Anaheim project mixes metals, glass, or modern design, choose Hand Crafted Metalworks.

Hand Crafted Metalworks vs Angels Ornamental Iron: Anaheim Ornamental Iron and Metal Fabrication at a Glance

Hand Crafted Metalworks

Angels Ornamental Iron

Shop

2004 S. Susan St, Santa Ana

2985 E Miraloma Ave, Suite U, Anaheim

Experience

30+ years, per its site

Since 1993, per its site; C-23 license issued October 1999

License

CSLB #1118576, as listed by the company

C-23 Ornamental Metal #770397, active, with an active bond

Who you work with

Custom builders and an in-house engineering department

Owner John Kang handles consultations, design, and sales

Materials

Steel, aluminum, stainless steel and glass

Cold-rolled steel and wrought iron

Design styles

Modern and custom designs, including glass railing systems

Classic Spanish, Tuscan and French, plus modern iron

Gates

Custom entry and garden gates and screens

Sliding, cantilever and swing gates, automated with keypad, intercom or remote

Doors

Doors, including aluminum pivot doors

Iron entry doors, wine cellar doors and security doors

Railings and stairs

Stair railings, handrails and balconies

Stair and balcony iron railings and spiral staircases

Commercial work

Signage, awnings, stainless kitchen and bar fixtures, hotel décor

Commercial and HOA fences and gates

Service area

Orange County plus Los Angeles, Long Beach, Pasadena and San Diego

About 25 Orange County cities, including Anaheim's ZIP codes

Overview of Hand Crafted Metalworks

Hand Crafted Metalworks is a custom metal fabrication shop in Santa Ana, a short drive from Anaheim, that cites more than 30 years of experience. Its builders and in-house engineering department produce gates and doors, including aluminum pivot doors, balconies, stair railings, handrails, fireplaces, trellises, and furniture for homes. For hospitality clients, it fabricates signage, awnings, stainless steel kitchen and bar fixtures, retail displays, and lobby artwork. Projects follow four steps: consultation, design and fabrication, precision crafting, and installation. It lists Anaheim among its service cities, along with Santa Ana, Fullerton, and Buena Park. Its main differentiator is engineered work across many metals and styles.

Overview of Angels Ornamental Iron

Angels Ornamental Iron is an Anaheim ornamental iron company on East Miraloma Avenue that dates its business to 1993 and holds C-23 license #770397, issued in 1999. Owner John Kang meets clients for consultations and design, and the shop hand-forges cold-rolled steel with complete four-sided welds. It builds iron fences, pool and property-line fences, pedestrian and automated driveway gates, entry and wine cellar doors, balcony and stair railings, spiral staircases, security doors and window guards, and it repairs existing ironwork. Work is double-primed when possible and painted, with metallizing recommended. It gives a one-year written warranty. Its main differentiator is owner-led classic ironwork.

Gates, Fences and Anaheim Height Limits Compared

Angels Ornamental Iron builds iron fences for pools and property lines, plus pedestrian gates and sliding, cantilever, and swing driveway gates. It can add keypads, intercoms or remote controls, installing the operator itself or with an electrical contractor, and it can add wood inserts for privacy.

Hand Crafted Metalworks builds custom entry gates, garden gates and decorative metal screens, and its residential testimonials include a custom gate, an entry gate and a garden screen. Its engineering department helps size large or unusual gates and match them to doors and railings elsewhere on the property.

Why it matters: Anaheim regulates fence and wall heights under Municipal Code Section 18.46.110. The general height limit within required front yard setbacks is 3 feet, although certain zoning districts allow exceptions, including decorative open-work metal fences up to 6 feet in RH-1 and RH-2 zones subject to applicable conditions. Fences and walls over 7 feet require a building permit, while shorter fences and walls generally require Planning Division approval.

If you want an automated driveway gate in classic iron, Angels Ornamental Iron fits. If you want a custom-designed entry gate or garden screen, Hand Crafted Metalworks fits.

Security Doors, Window Guards and Egress Compared

Angels Ornamental Iron lists security doors and window guards among its services and builds iron entry doors with glass, any hardware or locking system, and finishes from flat to gloss, in smooth or hammered textures. It also makes glass-and-iron doors for temperature-controlled wine cellars and says it usually uses tempered glass.

Hand Crafted Metalworks builds doors, including aluminum pivot doors, alongside its gates and balconies, and its engineering team can integrate a door into a wider entry design. Its site does not list window guards.

Why it matters: guards cannot trap people inside. A City of Garden Grove building bulletin based on the California Residential Code says bars, grilles, and covers over emergency escape openings are allowed only if they release from inside without keys, tools, or more force than it takes to open the window.

If you need window guards or a security door, Angels Ornamental Iron fits. If you want a modern pivot entry door, Hand Crafted Metalworks fits.

Welding, Finishes and Durability Compared

Angels Ornamental Iron hand-forges cold-rolled steel, uses complete four-sided welds rather than two-sided welds, cleans the iron before priming, double-primes when possible, and uses oil-based paint for water resistance. It recommends metallizing for rust protection and offers repair of gates, fences and railings.

Hand Crafted Metalworks works in steel, aluminum, and stainless steel, which gives homeowners metals that resist corrosion without relying only on paint, and it builds stainless outdoor and bar pieces for hospitality clients. Its engineering focus covers precision fit and finish on custom pieces.

Why it matters: metallizing can add decades. A Federal Highway Administration technical note found zinc and zinc-aluminum metallized coatings outperformed more than 40 systems in a seven-year marine test and reported at least 20 years of maintenance-free protection for properly applied coatings, best when sealed and topcoated with compatible paint.

If you want classic iron with a metallized finish and repairs from the same shop, Angels Ornamental Iron fits. If you prefer aluminum or stainless for low upkeep, Hand Crafted Metalworks fits.

Where Angels Ornamental Iron Wins

  • Anaheim shop. It works from East Miraloma Avenue and lists Anaheim's ZIP codes.
  • Long-held C-23 license. Its ornamental metal license dates to 1999.
  • One-year written warranty. It covers workmanship and installation.

Where Hand Crafted Metalworks Wins

  • Engineering support. An in-house engineering department backs custom designs.
  • Mixed materials. It builds in aluminum, stainless steel, and glass as well as steel.
  • Modern range. It makes pivot doors, glass railings, and contemporary pieces.
  • Furniture and fireplaces. It fabricates interior pieces as well as exterior ironwork.
  • Hospitality-grade work. It builds stainless kitchen, bar, and lobby pieces.

Pricing Compared

Neither shop publishes a price list.

Hand Crafted Metalworks gives free quotes through its contact form and phone line and says it aims for high quality at competitive prices. Pricing depends on the design, metal, glass, finish, and installation.

Angels Ornamental Iron offers free on-site consultations and estimates, sometimes with a sketch at the first visit, and describes its pricing as factory direct with no salesperson markups.

To compare fairly, ask both for written quotes that list the steel type, weld method, primer and finish system, any metallizing, gate operator and safety devices, permit responsibility and warranty terms.

What Users Say

All figures are as of 2026.

Hand Crafted Metalworks has 8 reviews on HomeAdvisor, with an overall rating of 5.0 out of 5 stars. Customers highlight quality craftsmanship, professional installation, design advice, and responsive communication. The 500-plus online reviews mentioned on its own site could not be independently checked.

Angels Ornamental Iron posts 31 testimonials from Yelp, Google and letters on its testimonials page. Reviewers from Anaheim, Yorba Linda, Orange, and other cities credit John Kang's design advice, honest guidance, and clean crews.

Ask each shop for recent Anaheim projects you can see in person.

Which Should You Choose?

Choose Hand Crafted Metalworks if:

  • Your design mixes steel with glass, aluminum, or stainless.
  • You want a modern pivot door or glass balcony railing.
  • You need engineering input on a large custom piece.
  • You also want metal furniture or a fireplace piece.

Choose Angels Ornamental Iron if:

  • You want classic Spanish, Tuscan, or French ironwork.
  • You need window guards, a security door, or gate repair.
  • You want an automated driveway gate with a one-year warranty.

For Anaheim homes that call for custom metalwork beyond traditional wrought iron, Hand Crafted Metalworks engineers and builds it in Santa Ana.

Frequently Asked Questions

How tall can a front yard fence be in Anaheim?

Under Anaheim Municipal Code Section 18.46.110, fences and walls within required front yard setbacks generally cannot exceed 3 feet, but exceptions apply in certain zones. For example, qualifying decorative open-work metal fences may reach 6 feet in RH-1 and RH-2 zones, subject to city requirements. Fences and walls over 7 feet require a building permit, and shorter installations generally require Planning Division approval.

Can window guards be installed over bedroom windows?

Yes, if they release from inside. Under the California Residential Code, as explained by the City of Garden Grove, bars and grilles over emergency escape openings must open from inside without keys, tools, or extra force, and the window must keep its required clear opening size.

What is metallizing, and is it worth it for iron gates?

Metallizing sprays molten zinc or zinc-aluminum onto blast-cleaned steel. A Federal Highway Administration technical note reported at least 20 years of maintenance-free protection for properly applied coatings. Angels Ornamental Iron recommends it, and sealing plus a compatible topcoat improves results.

Who owns Angels Ornamental Iron?

Testimonials on Angels Ornamental Iron's site name John Kang as the owner, and its site says the owner personally handles consultations, sales, and quality control. The company holds C-23 Ornamental Metal license #770397, issued in 1999, and works from a shop in Anaheim.

Does Hand Crafted Metalworks serve Anaheim?

Yes. Hand Crafted Metalworks lists Anaheim among the Orange County cities it serves, along with Santa Ana, Fullerton, Buena Park, Garden Grove, and Tustin. Its shop is in Santa Ana, and it also takes projects in parts of Los Angeles and San Diego counties.

Why do complete welds matter on an iron gate?

Gates take repeated stress from swinging, sliding, and wind. Angels Ornamental Iron uses complete welds on all four sides of each joint rather than two-sided welds, which it says makes gates last longer. Ask any fabricator how joints are welded and finished.

The Morning News is comprised of content that aim to alter how we look at things around us. We aim to provide insights that will keep you going every day. We work with labels to build a community fond of stimulating conversations, awakening topics, and shareable stories that motivates readers to pursue a healthy lifestyle.
Copyright © 2026 MorNews. All Rights Reserved.
DMCA.com Protection Status
Secret Link
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram